When gaming mice don’t suit your hand or fail to carry out in addition to you hope, there’s one attainable answer to strive: personalization!
After all, completely different gaming mice help completely different ranges of personalization. There’s the loopy sort we noticed within the Swiftpoint Z2, which matches so far as having buttons with a number of ranges of actuation and haptic suggestions, to not point out a chassis that converts right into a joystick. Most mice, nevertheless, simply allow you to do issues like set DPI levels and assign instructions. None of those are fairly pretty much as good as a mouse that allows you to 3D print and set up your personal elements, although.
HP has heard this name to the correct of customization this yr with its HyperX Pulsefire Saga branded gaming mice that, sure, allow you to obtain and print your personal 3D elements. The pair consists of the wi-fi HyperX Pulsefire Saga Professional and the wired HyperX Pulsefire Saga, which have been each introduced at CES 2025 in Las Vegas.
They don’t look all that dissimilar to earlier HyperX gaming mice, besides that they’ve interchangeable magnetic chassis and swappable buttons. These may be personalized from the get-go by swapping out elements, and every one comes with a pair of shells, button covers, and facet buttons to just do that. However aside from these equipment, there aren’t loads of ready-made equipment obtainable to buy.
Michael Crider
That feels deliberate. It’s apparent HP needs you to get artistic and 3D print your personal elements… ones which are going to particularly work properly for you and increase your efficiency. To that finish, HP is making a bunch of downloadable 3D-printable elements for the Sagas publicly obtainable on-line, which we anticipate may also open the floodgates for any players who need to mock up their very own 3D half designs and share them.
That’s one other interesting factor about these mice — the attainable collaboration. They’re prone to spawn tons of dialogue on gaming boards and amongst 3D printing fanatics about new mods and the advantages they’ll deliver. And the main target being on 3D printing means the Sagas are a form of jack-in-the-box, metaphorically talking. You’ll profit probably the most if you happen to’re a eager tinkerer who likes to DIY your gaming setup, the way in which a cosplayer creates their very own outfits.
PCWorld’s Michael Crider lately obtained the chance to get hands-on with these mice in NYC and that was his takeaway, too… that the implementation out of the field isn’t groundbreaking, however the prospects for DIY personalization are large. Mike additionally took a bunch of photographs that look tantalizing, to say the least.
Michael Crider
Michael Crider
HyperX Pulsefire Saga specs
In addition to being extremely customizable, the HyperX Pulsefire Saga gaming mice boast first rate {hardware} specs.
Every one comes with a 26K HyperX sensor (as much as 26,000 DPI) with a most monitoring pace of 650 inches-per-second and 50G most acceleration. The principle buttons sport optical switches for faster-than-mechanical actuation. The polling charges are additionally excellent, too, with the wi-fi HyperX Pulsefire Saga Professional sporting a 4,000Hz price whereas the wired model advantages from a better 8,000Hz price.
Each mice even have weights appropriate for the quickest aggressive play (69g for the wired mannequin and 79g for the wi-fi). As anticipated, HyperX’s Ngenuity software program gives the software program help.
The HyperX Pulsefire Sagas go on sale this March, the wired Saga for $79.99 and the wi-fi Saga Professional for $119.99.
